In February I began working on the white-line sensors, trialling different designs and what would work best, having them on a board a fixed distance apart around the line was what we ultimately went with for this design, then working on the code trying to discover ways of making the robot drive faster whilst also […]
February – Edward L-S Read More »
the main focus of this month’s labs was to finish our website and finalize our PCB design for the IR sensors on the microhouse. We finished the PCB design for the IR sensor successfully after several failed attempts. In designing the PCB, we faced some challenges when using the software given to us. So all
November – Gayathra Korala Read More »
First, we made the decision to build the electric circuit for infrared sensors. We chose to start collecting all of the components in bags in order to prevent losing any of them or having replace them with new ones because of how many there are. Subsequently, we started connecting it using the electrical circuit sketch
November – Hussain Dasmah Read More »
Through November I have been working on brushing up the website ensuring all the criteria have been met for the website initial assessment. Working on the general design getting it into a format and layout everyone on the team is happy with and beginning to add information about our micro-mouse and the overall project. Alongside
November – Edward L-S Read More »
Through continuous improvement and modification, we have successfully completed the circuit and measured the correct voltage waveform signal. To this end, we began PCB design. Due to the large number of components, we made multiple design adjustments and optimization failures. Based on our experience, we considered modular design and designed some port circuits together. At
November – Gang Chen Read More »
First, the Kilo group discussed each member’s skills and which sections in the team matrix would be best for him. We also made sure that each member was at the right position that he feels confident with the sections he assigned. As a result, we finished the team building exercise, which was the first step.
October – Hussain Dasmah Read More »
Within the first month of the group design project, we were able to make good progress in completing laboratory exercises and progress on our project tasks. we were able to finish the lab exercises quite successfully. We found getting the rotation of wheels in difficult configurations a bit challenging but was able to get favorable
October – Gayathra Korala Read More »
I am the Webmaster tasked with working on the website learning how to use WordPress looking at formatting all the pages required for the specification so all the information can easily be added as we work throughout the project. Learning the interface of WordPress has been quite difficult as it’s very different comparatively to other
October – Edward L-S Read More »
In this experiment of Infra Red Sensors, following the guidance of the project leader, I attempted to independently design the circuit and use additional plug-in boards to assist in installing the circuit. Due to the excessive number of components, I prepared bags in advance to classify them. Due to the complexity of the circuit in
October – Gang Chen Read More »
